SmileStone Acrylic Sealer for SmileStone & Jesmonite

SmileStone Acrylic Sealer is an eco-friendly, water-based acrylic coating suitable for sealing SmileStone and Jesmonite artworks. 

Sealing is important as it not only brings out the colour of your Jesmonite piece, but also waterproofs the surface meant for contact with water or food. 

It can easily be applied with a dry sponge or brush. If applying more than one coat, allow the first coat to dry for 2-3 hours before applying the second coat. We recommend applying two thin coats or more to help waterproof the surface.

The sealer will dry in 12-18 hours.

Available in 2 finishes: Satin (slightly glossy look) and Matt (invisible look).

Take note that the acrylic sealer is not food-safe. If you are looking for a sealer that is food-safe, or one with a matt finish, we recommend using our beeswax sealer instead.

Key Advantages

• VOC-freeSolvent-free
• Low Odour
• UV & Heat-resistant
• Drying Time: 12-18 Hr

What's the difference between the  SmileStone acrylic sealer and  beeswax sealer? Which one should I use to seal my SmileStone and Jesmonite artworks?

The SmileStone acrylic sealer is not food-safe, so it should not be used for items that will have direct or indirect contact with food. The beeswax sealer is 100% natural and safe for food contact.

The SmileStone acrylic sealer is available in two finishes. On the other hand, the beeswax sealer is almost invisible, and gives the artwork a very smooth and almost buttery-like finish.

Lastly, once applied in multiple coats, the SmileStone acrylic sealer can last for many years. It may only require a new coat after several years. Whereas the beeswax sealer is 100% natural, so you may need to reapply it regularly once the sealer wears off.

View this post on Instagram

A post shared by Resin Play (Singapore) (@resinplay.sg)

View this post on Instagram

A post shared by Resin Play (Singapore) (@resinplay.sg)