Type: Platinum silicone (Addition-cure) Colour:Mint (Opaque) Mix Ratio:10:1 by weight Potlife / Work time:30 to 40 minutes
Demould: Approximately 3 to 4 hours (depending on volume mixed and temperature) Hardness:Shore 40A (Firm)
Please take note that all silicone rubbers may be subject to cure inhibition by contaminants on the surface of the master, or the material of the master being used for mould making. If your silicone rubber does not cure, there could be a chance that your master is reacting with the silicone rubber.
Materials that may inhibit the curing of platinum silicones are: Sulphur-based clay, tin-cured silicone rubber, latex rubber, some paint products, some 3D-printed plastic materials, etc.
Uncured rubber can be difficult to remove from your mastersand may stain them. We recommend performing a small teston your masterbefore making your actual mould.