Pinkysil silicone is a super fast setting, certified skin safe silicone. User friendly with its 1:1 mix ratio by volume. Pinkysil is ideal for achieving small intricate details. No need for scales or degassing. We use this silicone rubber for our mould-making and resin casting workshop.
Imported from Barnes Australia.
Recommended for: Fast Moulds, Small Moulds, Beginners, Fine Details
Potlife / Work time: 6 mins
Demould time: 30 mins
Hardness & Type: Shore A20 +/-2 Silicone Elastomer, 2500cps
Pinkysil is a two-component, addition curing, low viscosity silicone designed for taking very fast impressions. It is ideally suited to and is the product of choice for fast set moulds where a free flowing product is required and when time factors are an issue. Pinkysil is also used in skin contact applications such as body casting as is certified suitable for skin contact. It is not certified for food contact applications.
Please take note that all silicone rubbers may be subject to cure inhibition by contaminants on the surface of the master, or the material of the master being used for mould making. If your silicone rubber does not cure, there could be a chance that your master is reacting with the silicone rubber.
Materials that may inhibit the curing of platinum silicones are: Sulphur-based clay, tin-cured silicone rubber, latex rubber, some paint products, some 3D-printed plastic materials, etc.
Uncured rubber can be difficult to remove from your masters and may stain them. We recommend performing a small test on your master before making your actual mould.
Technical Data Sheets
Get the latest updates on new supplies, workshops and promotions!