Jesmonite Acrylic Sealer has been discontinued. You may check out our SmileStone Acrylic Sealer instead.
Jesmonite Sealer is a pure acrylic coating for AC100, as AC100 will require a sealer when used externally to provide resistance against environmental contaminants. It is durable, flexible, and UV resistant and is matt in appearance and can be applied by brush or spray. It is water based so is non-toxic.
This sealer can also be used as a vehicle for distressed finishes on all Jesmonite products.
Dependent upon prevailing conditions, products sealed with Jesmonite Sealer will require re-coating at 6 – 10 year intervals.
1 bottle contains 1kg of acrylic sealer.
Application:
We recommend that two coats of Acrylic Sealer should be applied onto low porosity surfaces such as AC100, with the first coat being diluted with 10 – 20% water. Diluting the first coat will aid the chemical bond of the Acrylic Sealer onto the material surface. The second coat is applied once the first coat is touch-dry. Do not allow first coat to dry completely before applying the second coat. In principle the application of several thin coats is preferable to one thick coat.
Acrylic Sealer should be applied with a high quality brush or with a clean high quality dense foam roller evenly across the surface. Ensure that all surfaces are clean, dry, and free from any grease or oil.
Acrylic Sealer can also be diluted with water and pigmented using Jesmonite Paste Pigments to create colour washes to add a patina or to age casts.
Technical Data Sheet
Get the latest updates on new supplies, workshops and promotions!