1.6L Empty Pump Bottle for Fast & Accurate Dispensing of Resin & Hardener - 5ml or 10ml Pump

1.6 litre capacity PC plastic pump bottle for fast and accurate dispensing of resin and hardener. No need for tedious volume or weight measurement! Perfect for those who like speed and accuracy. We use these pump bottles in our workshops - so just ask us the number of pumps required for our workshop moulds and save all that hassle.

Each empty bottle comes with a dispensing pump of either 5ml or 10ml.

Sold per bottle, hence, please add 2 pcs to cart if you wish to have 1 bottle for resin and 1 bottle for hardener.

If you are using HeatResist™, ArtCast™, RiverCast™ or our Bioresin which mixes in a 2:1 ratio, we recommend getting 1 bottle with a 10ml pump (for your resin) and 1 bottle with a 5ml pump (for your hardener) so that you can have an exact 2:1 ratio by simply pumping once from each bottle.

If you are using Non-Toxic 2-in-1™, ArtCoat™, or ArtResin which mixes in a 1:1 ratio, then you should get 2 bottles of the same dispensing volume.

Note: We always recommend testing the pumps before use to ensure that the correct volume is dispensed. If your pump is not dispensing well, loosen the cap to release air into the bottle, try pressing the pump head down repeatedly with some force to unclog any resin in the pump and try dispensing again. Your pump head could either be clogged, or there could be air pressure inside the bottle hindering the dispensing. This may occur if resin is left sitting in the bottle and has not been dispensed for some time, or if the resin has has dried up at the mouth of the pump.